Ex-United Counties Lodekka 651 (651EBD) has been returned to the main BusWorks site today for the bodywork restoration to resume. Restoration of this vehicle stalled during 2010 due to problems with the engine/gearbox combination. Recently, however, the brakes on both axles have been relined and the skimmed brake drums refitted and a decision was taken to resume the bodywork restoration whilst the running unit problem is solved.
Monday, 24 January 2011
UCOC Lodekka 651 returns to BusWorks
Ex-United Counties Lodekka 651 (651EBD) has been returned to the main BusWorks site today for the bodywork restoration to resume. Restoration of this vehicle stalled during 2010 due to problems with the engine/gearbox combination. Recently, however, the brakes on both axles have been relined and the skimmed brake drums refitted and a decision was taken to resume the bodywork restoration whilst the running unit problem is solved.
Sunday, 23 January 2011
Metropolitan reframe progresses
The reframing of London Metropolitan MD60 continues to make good progress at our Brinwell Road site. A freelance welder/fabricator has been dedicated to the project and has reached the stage where the steel supports that were bracing the upper structure whilst the waistrail was rebuilt have now been removed.There is still much work to do but MD60 is certainly on the road to recovery. Further horizontal steel sections are required and upon completion, the lower structure steel stress panelling will be welded to the frame structure.
Saturday, 22 January 2011
FoKAB Panther 419 arrives
FoKAB's Panther 419 (UOU419H) has arrived at the BusWorks for a roof rebuild. Built in 1970 with a Plaxton 'Derwent' style body, the construction includes a substantial amount of timber, which was very uncommon for buses even by the 1960s.The FoKAB group had become increasingly concerned by body movement and water ingress on 419; sister bus 417 owned by the group had its roof extensively rebuilt many years ago, but the extent of the work meant that 417 was off the road for several years.
An initial inspection of 419 shows that there is soft or rotten roof timbers and the sealent between the roof panels and timber has broken down, leading to loose panelling, corroded screws to secure panel mouldings and water ingress. The BusWorks has therefore been tasked to rebuild the roof of this fine vehicle.
Friday, 31 December 2010
Lodekka 651 and New Year resolutions
Work is due to re-start on United Counties Lodekka 651EBD early in the new year after several months in store. Work ground to a halt after difficulties in matching the Gardner 6LX engine and Bristol gearbox supplied but, thanks to Carl Ireland of Hull, we now think the problem has been resolved. To fit the 6LX engine, the engine mountings and supporting cross-members will need to be changed and Carl Ireland thinks the correct ones have now been sourced - they differ from the pattern used for Bristol or Gardner 6LW engines. So, our new year's resolution is to get this Lodekka project back on track and returned to its home with the Rushden Historical Transport Society.
Tuesday, 30 November 2010
Southend 232 takes shape
Resembling a scene more akin to Northern Counties' works, Southend 232 is taking good shape. The roof has been completely repanelled after discovering several areas of severe oxidisation, and the window pans have also been renewed. This work follows replacement of the typical Northern Counties 'top-hat' section around the main steel framing, which all had to be replaced. Work is progressing from top to bottom - but there is still much work to be done, particularly on the front and rear framing which is badly corroded.
National 1000 repanelled
Repanelling is well under-way on ex-Merseyside PTE Leyland National 1000 (OHF858S). The Busworks has been busy snapping up Leyland National panels from contacts around the country, to assist with 1000's restoration - but I think we could build a few from scratch now as well! We have also had some new side panelling made for 1000 using templates supplied to a local fabrication company.
Catching up with the Bristol J-type
It has been a while since we caught up with progress on Bristol J-type BHW432. Following the fabrication of a complete new timber framed rear end and the replacement of all side and roof timbers, repanelling is well advanced. We have made new fibreglass window pans, to replace the original ones that were steel and badly corroded. BHW432 will return to its role within a vintage fairground company upon completion.
Subscribe to:
Posts (Atom)